Dual ASI BAC855 for INOKIM OXO · two motors, two controllers
Two controllers, up to 13 kW, and a scooter that has been measured at 137 km/h.
Dual ASI BAC855 for INOKIM OXO is a plug and play upgrade kit that replaces both stock controllers in the INOKIM OXO with two ASI BAC855 units, one per motor. On the original OXO battery it runs 3 kW in total. On a 60V or 72V battery that can deliver 160 A it is set to 12.5 kW or 13 kW.
Nothing is soldered. You open the bottom of the scooter, swap the controllers, fit the new throttle or display, and an ElectricGen engineer tunes both BAC855s to your battery in a remote session that comes with the kit.
What dual ASI BAC855 for INOKIM OXO changes on the scooter
The OXO has two motors and two cautious controllers. Two BAC855s with sensorless field oriented control turn the same hardware into a very different machine, and the battery decides how different.
Power
Up to 13 kW across two motors
On the original battery the pair is set to 3 kW in total. Give them a battery that delivers 160 A and they run 6.25 kW each on 60V or 6.5 kW each on 72V.
Control
Field oriented, sensorless
Each BAC855 reads its own motor with ASI’s FOC, so both wheels pull evenly, the throttle feels linear and the motors run quietly. Auto tuning means nothing for you to set up.
Battery
Any pack from 48V to 72V
The kit runs the original 60V OXO pack or a 60V or 72V custom battery. With Dash Pro the voltage setting is on the bars, so a battery upgrade later is a setting.
Speed
Measured at 137 km/h
With a 72V battery, a 65 kg rider and our modified OX and OXO motors, the OXO has been measured at about 137 km/h. With stock motors and the original pack the gain is smaller but still very clear.
Cooling
Motor radiators, optional
Aluminium radiators in black or orange add cooling area to both motors and let the airflow carry heat away. Recommended with the custom battery settings.
Settings
Yours to change
Power, assist levels in percent, wheel size for accurate speed, km/h or mph. With FabiRide Dash Pro you change them from the bars. With any other display, our engineer sets them with you.
Power by battery: 3 kW to 13 kW
Two controllers can only pull what the battery gives them. On the original pack, dual ASI BAC855 for INOKIM OXO is a sharper, stronger OXO. On a 160 A battery it is a different vehicle.
| Battery | Controller setting | Notes |
|---|---|---|
| Original OXO battery, 60V 25.6Ah | 2 x 1,500 W = 3 kW | The stock BMS limits current; the controllers are held back to match. |
| Custom 60V battery, 160 A or more | 2 x 6,250 W = 12.5 kW | For example our 60V 25Ah 10 kW Samsung pack. |
| Custom 72V battery, 160 A or more | 2 x 6,500 W = 13 kW | For example our 72V 35Ah 20 kW Samsung pack. |
How you answer Battery depends on the display. With FabiRide Dash Pro choose the range, 48V to 72V, tell us which pack you ride today during the tuning session, and change the battery voltage setting yourself when you move to a 72V battery later. With Eggrider V2 or the NONE option pick the exact battery from the list, because both controllers are tuned for that pack.
To use all of the power the kit has, the battery must deliver at least 160 A. With the original OXO battery the controllers are limited, which is why the original pack row above stays at 3 kW.
Choose your display: FabiRide Dash Pro, Eggrider V2 or your own
The Display option decides what you see on the bars and how much of the ASI you can change yourself. Every dual ASI BAC855 for INOKIM OXO ships tuned and ready to ride whichever display you pick, but only one of them talks back to the controller.
FabiRide Dash Pro
A colour touchscreen that reads the ASI and writes settings back to it, from the bars or from the free FabiRide app. It also carries your phone: calls, messages and music appear on the display. See the full Dash Pro feature list.
Eggrider V2
A compact display with a button that switches the controller on and off and a phone app for the basic readings. A good fit if you want the power and not the screen. Eggrider V2 details.
The kit replaces the original OXO throttle, because the display and its throttle come as one unit. The APT 750C is not offered with this kit at the moment. If you do not want a display at all, choose NONE: you get a throttle with an on and off button and a small LED readout that shows battery voltage.
What Dash Pro adds to the dual ASI BAC855 for INOKIM OXO
Most displays only show numbers. Dash Pro changes them. On an ASI BAC controller every one of these works, because the display talks to the controller in both directions.
Tune from the bars
Power, speed and assist levels
- Edit the assist levels in percent and the power and speed behind them
- Up to ten riding maps, each with its own speed, power and regen
- Pin one map so the bike always starts there
Battery voltage
Run anything from 48V to 72V
- The battery voltage setting is yours to change in Dash Pro, so one kit follows you from a 48V pack to 52V, 60V or 72V
- Swap batteries without sending the controller back for reprogramming
- Choose 48V to 72V in the battery selector; that option exists for Dash Pro only
Limiter
A cap you lift with one press
- Set a speed and power ceiling for the road, the kids or a new rider
- Lift it again from the handlebar remote
- Per rider ceilings stay on the bike
Reverse
Reverse gear from the bars
- Select reverse from the handlebar buttons, the ASI does the rest
- Walk the bike backwards out of a rut or off a trailer
- A live indicator on the dashboard shows when reverse is engaged
Phone on the bars
Calls, messages, music
- Answer or reject calls from the handlebar remote
- Read incoming messages on the display
- Skip tracks and change volume without touching the phone
Safety and trips
Crash detection and ride history
- Crash detection sends an SOS with your location to your emergency contacts
- Every ride is recorded with its route on a map
- Full statistics per trip in the app
Reverse gear is one more thing Dash Pro adds on the INOKIM. Select it from the bars and the scooter rolls backwards out of a lift, a hallway or a parking rack instead of you lifting it.
The FabiRide app is free on iPhone and Android, and the same account opens in any browser. Settings and ride history live in the account, so a new phone loses nothing.
01
Set up
A short wizard connects the display to the ASI and asks only about things your bike has.
02
Tune
Riding maps, battery voltage, assist levels, throttle and brake feel, all written to the controller.
03
Share
Add riders with their own ceilings. The bike remembers who is on it.
What is in the box
Pick the options you need in the selector above and dual ASI BAC855 for INOKIM OXO arrives complete. Nothing else is required to ride.
Controllers
2 x ASI BAC855
One per motor, configured for your battery before they ship, then fine tuned with you in the remote session.
Harness
Plug and play OXO loom
Matches the connectors on the INOKIM OXO for both motors. Nothing to solder under the deck.
Throttle and display
Your choice
FabiRide Dash Pro, Eggrider V2, or NONE with a throttle that has an on and off button and an LED voltage readout.
Optional
Motor radiators
Black or orange. Add cooling area to both motors for the higher power settings.
Fitting the dual ASI BAC855 for INOKIM OXO
01
Remove the stock controller
Open the bottom of the scooter, disconnect the battery and unplug both stock controllers. No connector is cut.
02
Plug in the loom
Plug the new loom into both motors, the battery, the brake and the new throttle or display. Every lead matches an OXO connector.
03
Mount and route
Sit the two BAC855s where the old controllers were, close the deck, and fit the throttle or display on the bars. Each controller is 81 x 55 x 39 mm and weighs 300 g.
04
Remote tuning session
Book the session that comes with every kit. An ElectricGen engineer connects to the controller, checks your installation, and tunes the settings to your battery, your riding and your terrain.
Keep it dry. The controller and its white signal connector must be protected from dirt and water during and after the installation. Water inside that connector is the one failure the kit cannot protect itself against.
ASI BAC855 for INOKIM OXO: specifications
| Item | Detail |
|---|---|
| Controllers | 2 x ASI BAC855 (manufacturer page) |
| Motor control | Field oriented control (FOC), sensorless, auto tuning, one controller per motor |
| Power settings | 3 kW on the original battery; 12.5 kW on 60V or 13 kW on 72V with a 160 A battery |
| Battery | Original OXO pack, or a custom 60V or 72V pack; with FabiRide Dash Pro the whole 48V to 72V range. Full power needs 160 A or more |
| Top speed, measured | about 137 km/h with 72V, modified motors and a 65 kg rider |
| Controller size | 81 x 55 x 39 mm, 300 g, each |
| Fits | INOKIM OXO |
| Displays | FabiRide Dash Pro, Eggrider V2, or NONE (throttle with LED voltage readout) |
| Installation | Plug and play, no soldering |
| Tuning | Remote session with an ElectricGen engineer, included |
Questions before you order
Does dual ASI BAC855 for INOKIM OXO work with the original battery?
Yes, at 3 kW in total, which is already a sharper and stronger OXO. The original pack cannot deliver the current for more. For 12.5 kW or 13 kW you need a 60V or 72V battery that delivers at least 160 A.
Why two controllers?
The OXO has two motors, and each motor gets its own BAC855. Both are tuned together in the remote session so the wheels pull evenly.
Why is there a 48V to 72V option in the battery list?
It is for FabiRide Dash Pro only. Dash Pro lets you change the battery voltage setting of dual ASI BAC855 for INOKIM OXO yourself, so the kit does not need to be tied to one pack. With Eggrider V2 or without a display, choose the exact battery you ride and we configure both controllers for it.
Do I need new motors for 137 km/h?
That figure was measured with our modified OX and OXO motors, a 72V battery and a 65 kg rider. With stock motors the kit still transforms the scooter, but the top speed is lower and the motors run hotter, so the radiators are worth having.
Do I need to replace the throttle?
Yes. The display and its throttle come as one unit, so the original OXO throttle comes off. If you choose NONE you still get a new throttle, with an on and off button and an LED voltage readout.
Do I have to solder anything?
No. The loom of dual ASI BAC855 for INOKIM OXO matches the OXO connectors, both controllers arrive configured, and the display plugs into the loom. You open the deck, swap the controllers and close it again.
Related to dual ASI BAC855 for INOKIM OXO: ASI BAC855 kit for INOKIM OX · FabiRide Dash Pro display · Modified INOKIM OX and OXO motor · Radiator for INOKIM OX and OXO motor · INOKIM batteries · all INOKIM controllers and electronics
James –
The quality and durability of this product is really amazing. I have been using mine for quite some time and it is best solution to increase scooter power